Ground equipment Inkomp-neft UD INER, UNHCR, TGZ, etc.

Installations for the metered supply of the chemical agent of the UD INER series are designed for the controlled supply of corrosion inhibitors, salt deposits or demulsifiers to oil producing wells, the pipeline of the field oil collection and transportation system.

Multichannel polymer reinforced pipelines TGZ 2, TGZ 3 are used if it is necessary to simultaneously supply several process fluids. The power conductor is made of copper wire with an area of 1.5 mm. The armor is made of galvanized steel wire. The shell is polyethylene, the channel is a polypropylene tube of small diameter.

Polymer reinforced pipelines with electrical conductors TGZ 5, TGZ 8, TGZ 10, TGZ 15 are used in technologies that simultaneously require a hydraulic channel for supplying process fluids, power conductors for powering various units, signal conductors for monitoring ongoing processes.

Polymer reinforced pipelines with heating cables TGZ 5, TGP 5. They are used for the supply of chemical reagents, pumping of aggressive liquids, are used in the oil collection and PPD system, as well as for strapping block metering units. Heating power 25 W/m.

Technological polymer reinforced pipelines TGZ 5, TGZ 7, TGZ 10, TGZ 15, TGZ 20, TGZ 25, TGZ 30, TGZ 35, TGZ 40, TGZ 45. They are used for the supply of chemical reagents, pumping of aggressive liquids, are used in the oil collection and PPD system, as well as for strapping block dosing units.

Reagent injection devices into the fountain fittings and pipelines of UNHCR, UVKS, and UNHCR ensure the hermetic passage of the capillary pipeline through the wellhead fittings. Depending on the type of wellhead fittings, input devices of various designs have been developed and supplied.

• The input device through the side outlet of the wellhead fittings.;
• Stuffing box input UVKS;
• A device for entering through the cable entry of the wellhead fittings with the possibility of crimping the UVSO.

Hydraulic valves for chemical dosing units are designed to distribute the pumped liquid inside the dosing unit. It is a monoblock with needle valves.It is attached with a flange to the wall of the installation housing. Shut-off needle valves provide flow overlap at a pressure of up to 40 MPa.

Catalog

Questionnaire